Concealed carry for professional operatives, while providing a higher level

of accuracy and control, even in full-auto.

Farmingdale, New York,– The Mako Group, a leading USA distributor of unique weapon accessories, optics and holsters, plus EOD and breaching products, has added the KPOS 18 Glock-to-Carbine Conversion Kit to its expanding line of KPOS pistol enhancers. With this addition, The Mako Group now offers pistol-to-carbine solutions for Glock 17, 17L, 18, 19, 20, 21, 22, 23, 24, 25, 31, 32, 34, 35, plus Sig 226 and Sig Pro.

All KPOS pistol-to-carbine conversion kits are designed and manufactured by FAB DEFENSE, widely recognized as a global leader in weapon accessories.

Products available from The Mako Group meet the needs of Special Forces units, military, law enforcement agencies, SWAT teams, security organizations, and civilian weapons enthusiasts

All KPOS units have been designed to enable secure concealed carry under a light jacket or in a briefcase or purse, while giving the professional security operative instant access, better control and much greater accuracy at greater distances than possible with the pistol alone.

The KPOS 18 carries that even further, by taming otherwise hard-to-control fully automatic fire.

KPOS features include a folding stock; small size (smaller than other conversion kits or a Micro Uzi); simple drop-in installation; mounting to front and back of pistol frame; built-in charging handle; single-point sling; folding stock; rubber buttpad; top, bottom and side rails. It can be used with or without a suppressor, works with ported pistols, and provides instant access to the full-auto selector switch.

Construction is rugged aluminum and steel for maximum strength, longevity and accuracy.

FAB DEFENSE engineers have taken exceptional care in the development of KPOS pistol-to-carbine conversion kits, to ensure that many of the operating problems encountered with other manufacturers’ units do not exist in KPOS. For example, with other brands, carbon fouling in the front of the slide, frame and barrel areas often stop pistols from working properly. KPOS does not have this problem. KPOS allows the use of the pistol’s own sights because its patented recharging handle does not interfere with these sights, as do those of other brands.

KPOS is designed to eject brass effectively without the need for an added deflector. Other brands have added brass deflectors, but these often bounce brass back into the action, causing a jam. Unlike other units that add little or no stability to the pistol, allowing it to flex within the conversion frame, KPOS actually increases pistol stability and maximizes performance.

Manufacturers’ suggested list price is $587.25. See it at your favorite gun dealer, or visit www.themakogroup.com.

About FAB DEFENSE

Since its inception in 1961, FAB DEFENSE has designed and manufactured the highest-quality, state-of-the- 

future tactical equipment for Israel’s Military and Police. FAB works closely with Israeli Special Forces and SWAT teams to produce creative, no-nonsense solutions to the mission-critical challenges met in the field.

Other battle-proven FAB DEFENSE products distributed in the USA by The Mako Group include rail systems; hand guards; grips and combination bipod-grips; stocks; parts and accessories; safety rods; magazine accessories; rail covers; and KPOS, the pistol-to-rifle conversion that is prized by knowledgeable professional undercover operatives.

About The Mako Group

In addition to its broad line of FAB DEFENSE products, The Mako Group also offers Meproplight optical sights for M16, M4, AR-15, AK-47, AK-74, Galil, SA vz.58, shotguns, and other weapons, plus an extensive selection of Front Line holsters for tactical, on-duty and private carry.

 

Because the products distributed by The Mako Group have been specifically requested, and used, by the Israel Defense Force (IDF), Israeli Police and Security Agencies, they have seen extensive real-world combat with some of the most elite forces in the world. Few distributors can make this claim about their products. These are true combat-proven weapon accessories.

 

The Mako Group is managed by former military, Secret Service and Special Forces operatives that have tested, used, and relied on such equipment to preserve their lives and the lives of others.

 

The Mako Group has a liberal Test and Evaluation (T&E) program in place, with policies that make it simple for publishers, editors and writers to obtain equipment for stories and articles.

 

The Mako Group is a Registered Contractor to the US Department of Defense.

For more information, contact The Mako Group, 1 Lenox Avenue, Farmingdale, NY 11735, 631-880-3396, This email address is being protected from spambots. You need JavaScript enabled to view it. or visit www.themakogroup.com.

Technology International® (ATI), the leading manufacturer in gunstocks and firearm accessories, is introducing the first line of ATI accessories for the Vepr platform.

ATI's new Vepr Strikeforce Elite Stock and Six-Sided Forend Package are the first aftermarket accessories available for the Vepr firearm platform. The Vepr stock and forend package is manufactured in Milwaukee and provides three USA made ITAR compliant parts.

Jon Shaffer, Director of Business Development states, “The Vepr Strikeforce Elite package was designed to keep the overall weight of the gun balanced and lightweight.  The forend weighs a mere 17 ounces and is produced from a high strength, lightweight CNC machined billet aluminum that allows the user to mount accessories where they need them with the unique 45º angles around the circumference of the forend.  Our goal is to not only increase the function and versatility of a firearm but to make it look good by doing so.  Each part is thoroughly thought out for function, reliability and appearance.”

The package is also equipped with an 8” aluminum optic rail system that suspends over the gas tube for effortless optics mounting on a natural sight path which is constructed of Military Type III Anodized, 6061 T6 Aluminum with aluminum front and rear mounts.

VEPR STRIKEFORCE ELITE FEATURES

• SIX POSITION COLLAPSIBLE STOCK
• SCORPION RECOIL SYSTEM
• SIX-SIDED 18” FOREND - WEIGHS ONLY 17 OUNCES, INSTALL RAILS AT 45º ANGLES AROUND THE CIRCUMFERENCE OF THE FOREND FOR ULTIMATE VERSATILITY
• FORWARD STABILIZING 7-SIDED NOSE CONE - CONSTRUCTED OF MILITARY TYPE III ANODIZED 6061 T6 ALUMINUM, ANCHORS INTO ANY CORNER, DOOR JAM, FENCE, WOOD, CONCRETE, ALUMINUM SIDING, ETC. FOR INCREASED STABILTIY AND ACCURACY, LIGHTWEIGHT, INNER DIAMETER OF FS8 NOSE CONE - 1.0”
•  

ATI's Vepr accessories are available for pre-order now exclusively at www.atigunstocks.com and will be shipping beginning on January 2, 2013.

About ATI Gunstocks

ATI is located in Milwaukee, Wisconsin and is the largest aftermarket gun stock manufacturer in the world. ATI's guiding principle is to develop and produce high quality, yet affordably priced, gunstocks and accessories that are both safe and easy to install. ATI develops new products in-house at their ISO Certified Milwaukee facility, and warrants their safety and quality by testing them extensively at their Iowa facility. For more information about ATI and their products please visit www.atigunstocks.com or call 800.925.2522. 

Advanced Technology International® (ATI), the leading manufacturer in gunstocks and firearm accessories, is introducing the ATI Raven for the Benelli M4.

Locally manufactured in Wisconsin, the ATI Raven for the Benelli M4 is the first and only U.S. made adjustable stock and forend for the Benelli M4. ATI's new Raven stock and forend boasts many new advancements and has multiple patents pending.

"The Raven goes far beyond just being the first adjustable six position stock for a semi-automatic shotgun," said Jon Shaffer, Director of Business Development. "The infinitely adjustable cheekrest and the buffer tube tension mechanism, which provides the perfect amount of drag when adjusting the stock's length of pull, are just the beginning of new innovations that ATI will bring to the gun accessories market."

ATI aimed to make one of the highest quality stocks on the market with the majority of the Raven's stock and cheekrest mechanism components manufactured of Military Type III Anodized 6061 T6 Aluminum.

Shaffer also pointed out “Another feature and industry first for the Raven is a sleek forend integrated heatshield that hovers over the barrel of the shotgun preventing any metal-to-metal contact.  The forend also has a soft touch over-mold to provide a comfortable non-slip texture.  Our designers and engineers are continually seeking to improve the functionality and comfort of firearms.”

BENELLI M4 RAVEN FEATURES

• ADJUSTABLE TENSION MECHANISM TO INCREASE OR DECREASE THE DRAG OF THE BUTTSTOCK ALONG THE BUFFER TUBE
• PRECISION CNC MACHINED RECEIVER MOUNT WITH OPTIONAL PIVOTING SLING LOOP - AMBIDEXTROUS
• NEW AND IMPROVED SCROPION RECOIL GRIP WITH EXTENDED SCORPION MATERIAL TO REDUCE THE RECOIL AND DISCOMFORT TO THE SHOOTERS HAND AND THUMB, SURE-GRIP TEXTURE, AND THE ELIMINATION OF THE FELT PUNCH OF THE RECOIL
• SCORPION RAZORBACK RECOIL PAD WHICH IS NON-SLIP AND REMOVABLE, ELIMINATES THE FELT PUNCH OF THE RECOIL, REDUCES THE CHALLENGE OF REQUIRING THE TARGET BY MINIMIZING MUZZLE LIFT
• NEW INFINITY ADJUSTABLE SOFT TOUCH POLYMER CHEEKREST WHICH IS HAS AN ELONGATED DESIGN TO PROVIDE THE PERFECT FIT FOR EVERY USER, ERGONOMIC REAR DIAL FOR QUICK AND EASY CHEEKREST ADJUSTMENTS, INIFINITY ADJUSTABLE FROM ZERO POSITION TO A COMFORTABLE HEIGHT OF VIEW FOR ANY RECEIVER MOUNTED OPTIC, MAINTAINS THE SAME CHEEKREST HEIGHT OF OEM STOCK IN THE FULLY COLLAPSED POSITION
• INTEGRATED HOVERING HEATSHIELD ELIMINATING METAL-TO-METAL CONTACT THAT MAINTAINS ACCURACY AND PREVENTS WEAR
• MADE IN THE USA
• LIMITED LIFETIME WARRANTY

ATI's Raven for the Benelli M4 is available for pre-order now at www.atigunstocks.com and will be shipping to select stores beginning in Jan. 2013.

About ATI Gunstocks

All of ATI’s products are manufactured in the USA at our ISO Certified Facilities in Wisconsin. ATI's vertically integrated manufacturing plant includes departments ranging from molding and CNC machining to assembly and packaging. Beyond manufacturing ATI also features its own in-house engineering, product design, and graphics teams as well as a full-time inside and outside sales staff. For additional information about ATI please visit www.atigunstocks.com or call 800.925.2522.

Like us! Facebook.com/ATIgunstocks Follow us! Twitter.com/ATIgunstocks 

Milwaukee, WI- Advanced Technology International® (ATI), the leading manufacturer in gunstocks and firearm accessories is pleased to introduce the Halo Side Saddle for Mossberg® 500 and 590 model shotguns.

Locally manufactured in Wisconsin, the Patented ATI Halo Side Saddle System is the first in the industry to mount to the top of the receiver using the existing screw holes.  The Halo Side Saddle is constructed of Military Type III Anodized, 6061 T6 Aluminum, offering a sleek skeletonized design.  The Halo Side Saddle mounts to the top of the receiver using the existing screw holes.  There are three mounting locations on the ejection portside and six mounting locations on non-ejection port side, along with mounting locations for the optional 6-inch top rail.    ATI offers the Halo Side Saddle in a package with 6 or 9 Add-A-Shell Shotgun Holders and the top rail, also constructed of the same reliable Military Type III Anodized, 6061 T6 Aluminum. Users will be able to add as many shells as desired in any configuration.  The shell holders secure the shotgun shells firmly in place and weigh only a ½ ounce each.  Mount optics or other accessories to the top rail securely with the Military Type III Anodized, 6061 T6 Aluminum Six Inch Halo Side Saddle Top Rail.  This top rail weighs only 1-1/4 ounces.

FEATURES OF THE HALO SIDE SADDLE PACKAGE

• Military Type III Anodized, 6061 T6 Aluminum Side Saddle

1. oSleek Skeletonized Side Saddle Design
2. oMounts to Top of Receiver using Existing Screw Holes
3. oWeighs only 3-1/2 ounces
4. oThree Mounting Locations on Ejection Port Side
5. oSix Mounting Locations on Non-Ejection Port Side
6. oMounting Location for Six Inch Top Rail

• Military Type III Anodized, 6061 T6 Aluminum Modular Add-a-Shell Shotgun Shell Holders

1. oAdd as Many Shells as Desired in any Configuration
2. oSecures Shotgun Shell Firmly in Place
3. oWeighs Only ½ ounce each

• Military Type III Anodized, 6061 T6 Aluminum Six Inch Side Saddle Top Rail

1. oMount Optics or Other Accessories Securely to the Top Rail
2. oWeighs only 1-1/4 ounces

• MSRP:  SIDE SADDLE - $79.99

1. oSIDE SADDLE PACKAGE (includes 9 Add-A-Shell Holders and 6” Top Rail): $139.99
2. oSIDE SADDLE PACKAGE (includes 6 Add-A-Shell Holders and 6” Top Rail):  $119.99
3. oAdd-A-Shell Shotgun Shell Holders:   $9.99 each
4. o6-inch Top Rail:  $19.99

ATI's Halo Side Saddle for the Mossberg is available for pre-order now at www.atigunstocks.com and will be shipping to select stores beginning in Jan. 2013.

Bellevue, WA – (2/15/2013) – Aiphone Corporation, award winning manufacturer of intercom and entry security products, has released a series of installation videos on YouTube^®. “With the popularity of smartphones, customers are very comfortable downloading solutions instantly. These videos will help technicians who have questions install our products more quickly,” says John Mosebar, VP of Marketing. The current video line-up includes installation training on the IS Series, JF Series, and GT Series. Installation videos can be found at www.youtube.com/aiphonecorp.


 

About Aiphone
For over 60 years, Aiphone Communication Systems has solidified its position as one of the most esteemed providers of communication and intercom systems the world over. The Aiphone brand has become synonymous with a distinction of innovation and outstanding quality that has placed the corporation and its products at the forefront of the security and communication markets.

Bellevue, WA – (3/1/2013) – Aiphone Corporation, award winning manufacturer of intercom and entry security products, announces the release of their latest innovation, the JM Series Touchscreen Video Intercom system. The JM Series is great for securing businesses while conveniently helping visitors at main entrances or secondary entrances like will call, alley doors, or shipping and receiving. This new video intercom features a 7” touchscreen to easily navigate through functions while clearly viewing visitors on the large display. The JM Series includes picture memory which automatically records visitor images to internal memory or onto an SD/SDHC card for viewing on an external device.  Inside stations operate with one touch, hands-free communication, and includes a built in handset for use during private conversations or for communication in high-volume environments. The JM Series can be wired using existing door bell wire to connect the door station to the master station. Additional inside stations can be installed for internal communication throughout the building. Wiring choices between inside stations are flexible to help save on installation costs. Choose either homerun, daisy chain, or a combination of both methods using Cat 5e/6 cable between stations. The JM Series can accommodate 4 doors and 8 inside stations and can integrate with access control and CCTV systems. Visit www.aiphone.com for more information.

FOR IMMEDIATE RELEASE

John Deere Announces 2013 Gator™ Heavy-Duty XUV Models

Multi-Passenger XUV 825i S4 Makes Debut and Current Two-Seat Models Upgraded

CARY, N.C. (Feb. 5, 2013) — John Deere introduces its 2013 Heavy-Duty Crossover Utility Vehicle (XUV) lineup. Featuring the all-new, fastest, most powerful four-seat Gator available, plus updates to current models.

All New Four-Seat Gator XUV
Outdoor enthusiasts sharing the trail or work site can now transport friends, family and gear in the all-new, heavy-duty XUV 825i S4. The latest addition to the Gator family provides the durability and versatility owners expect around their property or off-road destination.
"The introduction of the XUV 825i S4 is a reflection of the growing popularity of our crossover utility vehicles," said David Gigandet, marketing manager. "Customers wanted our heavy-duty XUV, in a multi-passenger form that was comfortable and customizable. These new Gators provide an unparalleled balance of performance and work capability for all off-road challenges.”
To allow for extra passengers or needed cargo space, the XUV 825i S4 provides an innovative, convertible rear seat cargo space. Two additional passengers can be transported in the rear seat area that includes a large under-seat storage compartment. And when more cargo room is needed, the rear seat folds down in just seconds providing a flat platform with tie-down points that can hold an additional 200 pounds of payload.
The XUV 825i S4 boasts the proven 50 hp, 812 cc, inline 3-cylinder engine with EFI and dual overhead cams featured in the current 825i. This Gator also has a top-speed of 44 mph and fully locking 4-wheel drive system to quickly traverse all types of terrain. A best-in-class, fully independent, double wishbone suspension provides 8 inches of wheel travel and up to 11 inches of ground clearance. Power steering, with anti-kickback feature comes standard on these new S4 models providing operators easy vehicle control with only modest effort regardless of conditions.
The durable, composite and metal hybrid cargo box carries on the Gator tradition of superior hauling capability on the S4 models. The large 16.4 cubic feet cargo box has a 1,000 pound payload capacity. It features over 20 integrated tie-down points, a truck-style tailgate and removable sides for a flatbed mode.
The new Heavy-Duty S4 is also available with diesel power. The XUV 855D S4 is powered by a 23 hp, liquid cooled 3-cylinder diesel engine.

2013 XUV Line Updates
The XUV 825i now comes standard with dynamic downhill engine breaking, due to a new tight belt continuous variable transmission (CVT). Plus, a new seven-gallon fuel tank with digital readout on the dash adds 40 percent more fuel capacity and eliminates the analog dial. The XUV 625i and XUV 855D will also feature these upgrades, as well as the digital display cluster from the 825i as standard equipment. Power steering is now optional for both the 825i and 855D models.
“Constant focus on our customers enables us deliver ongoing improvements like this to our portfolio of XUVs,” said Gigandet.
All Gator XUVs are available in Realtree® Hardwoods™ HD Camo, olive and black or John Deere green and yellow color schemes. There are also more than 100 factory and dealer installed attachments available to customize them.
Visit your local John Deere dealer or www.JohnDeere.com/Gator to learn more.

About John Deere
Deere & Company (NYSE: DE) is a world leader in providing advanced products and services and is committed to the success of customers whose work is linked to the land - those who cultivate, harvest, transform, enrich and build upon the land to meet the world’s dramatically increasing need for food, fuel, shelter and infrastructure. Since 1837, John Deere has delivered innovative products of superior quality built on a tradition of integrity. For more information, visit John Deere at its worldwide website at www.JohnDeere.com.

KARLSTAD, Minnesota, USA – MATTRACKS®, the innovator in rubber track conversion systems, is introducing the new MT PLUS ™ model; available in 2013 as part of the 105 and 150 MT series.

Mattracks® has been converting 4x4 Trucks, SUVs, Tractors, ATVs & UTVs for the past 20 plus years. When customers requested an even “larger footprint” than is available in the market today for certain applications, Mattracks’ engineers developed the new MT PLUS ™, adding to the already extensive Mattracks® model lineup.

The new MT PLUS ™ has more “track” on the ground, which will provide greater performance in deep snow or soft soil conditions. With a 21” longer footprint on hard surface and 33” more in soft soil conditions compared to the standard 150/150 series; the rear track on the MT PLUS ™ provides unbelievable floatation in deep snow, sand, mud, swamps or any challenging terrain. Its self cleaning system allows the snow, sand, rocks, or any other debris to be ejected from the inside of the track. Coupled with the tread pattern and built in suspension the traction is outstanding, while providing more than 50% greater footprint compared to the standard 105/150 series. The PLUS system will fit most ½ ton pickups and large SUVs.

Additional information on the new MT PLUS™ is available by contacting Mattracks®, Inc. at 877-436-7800 (toll free US & Canada) or 218-683-9800. You can also visit us online at www.mattracks.com

The SRX 2200 Combat Radio is built on Motorola’s renowned APX platform with advanced features and important benefits to enhance warfighter productivity and safety, including:

EASY TO USE IN THE HEAT OF ACTION
The SRX 2200 features industry-leading APX ergonomics for true ease of use. Large controls are well-spaced and easily located, even when wearing gloves. The prominent top display is easy to read at a glance and dimmable for extra security.

COMMUNICATE CLEARLY IN HARSH CONDITIONS
APX delivers excellent audio to significantly improve clarity and voice intelligibility. A unique dual-microphone design in the radio locates the talker while it cancels out background noise –from heavy equipment to howling wind. APX Remote Speaker Microphones offer a flexible communication option for high noise and harsh weather environments.

READY FOR BATTLE AND BUILT TO LAST
Rugged as the mission, the SRX 2200 radio exceeds the IP67 submersion specification and can be submerged in 2 meters of water for 2 hours. It also meets the rigorous MIL 810 specifications. The multi-unit charger enables you to charge the radio at higher temperatures than standard chargers, a capability imperative in desert conditions. The FIPS 140-2 Level 3 security allows for deployment in the
most sensitive operations.

CAPABILITIES THAT ADAPT WITH YOU
Backward and forward-compatible with all Motorola radio systems, the SRX 2200 is P25 Phase 2 capable for twice the voice capacity, so you can add more personnel without adding frequencies or infrastructure. The SRX 2200 is combat ready with features and functionalities that can be adapted to current needs, then changed through software upgrades as those needs evolve. Whether you want to enable new accessories and applications or add features such as remote push-to-talk or remote wireless headsets, the SRX 2200 is the ideal choice for soldiers and Marines worldwide.

With over 80 years of experience serving the United States government, safety is our priority. Our innovative technology, proven platform, rugged reliability and affordable solutions can help your troops stay safe and successful, wherever the mission takes them.

For more information on the SRX 2200 Combat Radio, contact your local Motorola Sales Representative.
Motorola Solutions, Inc.
1301 East Algonquin Road Schaumburg, Illinois 60196, U.S.A.
800-367-2346
motorolasolutions.com

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2012 Motorola Solutions, Inc. All rights reserved. RO-4-2073